北京北广精仪仪器设备有限公司
品质是生命,服务是宗旨

Quality is life, service is the tenet

网站首页  ◇  产品展示    ◇   ◇   电压击穿试验仪 > BDJC-10KV介电强度试验仪(1万伏特)

介电强度试验仪(1万伏特)

发布时间:  2023-10-28

产品型号:  BDJC-10KV

产品报价:  

厂商性质:  生产厂家

所  在  地:  北京市海淀区上地科技园上地十街1号

产品特点:  介电强度试验仪(1万伏特)能够自动判别试样击穿并采集击穿电压数据及泄露电流,同时能够在击穿的瞬间电压迅速降低自动归零。软件系统操作方便,性能稳定,安全可靠。

同类产品
更多产品
产品概述

BDJC-10KV介电强度试验仪(1万伏特)

介电强度试验仪(1万伏特)满足标准:

GB1408-2006 绝缘材料电气强度试验方法

GB/T1695-2005 硫化橡胶工频电压击穿强度和耐电压强度试验
GB/T3333 电缆纸工频电压击穿试验方法
HG/T 3330绝缘漆漆膜击穿强度测定法
GB12656 电容器纸工频电压击穿试验方法
ASTM D149 固体电绝缘材料在工业电源频率下的介电击穿电压和介电强度的试验方法.

 

试验方式:
1、绝缘试样空气中击穿或耐压试验
2、绝缘试样浸油中击穿或耐压试验
3、绝缘试样空气中阶梯击穿或耐压试验
4、绝缘试样浸油中阶梯击穿或耐压试验
注:根据用户要求,可定制其他试验方式

 

技术要求:

1、设备输入电压: 交流 50KV (普通试验室电源均可兼容)
2、试验电压方式: 交流 0--50 KV ;
                  直流 0--50 KV
3、电器容量:10KVA
4、试验方法:0-50KV全量程可调(采用高精度电压采样器件,取消了同类厂家由于电压采样精度不够必须采用高压分级的方式)
5、击穿及耐压试验升压速率:
0.1 KV/S 
0.2 KV/S
0.5 KV/S
1.5 KV/S
  2 KV/S
2.5 KV/S
3.0 KV/S  

 

安全保护功能:
1、试验在试验箱中进行,试验箱门打开时电源加不到高压变压器输入端,即高压侧无电压。100KV测试设备高压电极距离试验箱壁的zui近距离大于270mm,50KV测试设备高压电极距离试验箱壁的zui近距离大于250mm,试验时即使人接触箱壁也不会有危险。
2、设备要安装单独的保护地线。接保护地线,主要是减少试样击穿时对周围产生的较强的电磁干扰。也可避免控制计算机失控。
3该试验设备的电路设有多项保护措施,主要有:过流保护、过压保护、漏电保护、短路保护、直流试验放电报警,电磁放电等。
4、直流试验放电报警功能:在设备做完直流试验时,当开启试验门时设备会自动报警,直至使用设备上的放电装置放电后报警会自动取消.(注:因为直流试验后不放电会危险到人身安全,不能直接拿取电极,起到提醒使用人员放电以免造成人身伤害)。
5、试验放电装置,电磁铁自动放电放置。

 

常规型号:

       BDJC-10KV
       BDJC-20KV
       BDJC-50KV
       BDJC-100KV
       BDJC-150KV

 

介电强度试验仪

满足标准:GB1408-2006 绝缘材料电气强度试验方法
Meet the standard: electrical strength test method for GB1408-2006 insulating materials
GB/T1695-2005 硫化橡胶工频电压击穿强度和耐电压强度试验
Test of power frequency voltage breakdown strength and voltage endurance of GB/T1695-2005 vulcanized rubber
GB/T3333 电缆纸工频电压击穿试验方法
Test method for power frequency voltage breakdown of GB/T3333 cable paper
HG/T 3330绝缘漆漆膜击穿强度测定法
Determination of breakdown strength of HG/T 3330 insulating paint film
GB12656 电容器纸工频电压击穿试验方法
Test method for power frequency voltage breakdown of GB12656 capacitor paper
ASTM D149 固体电绝缘材料在工业电源频率下的介电击穿电压和介电强度的试验方法.
Standard Test Method for dielectric breakdown voltage and dielectric strength of D149 ASTM solid electrical insulating materials at industrial power frequencies.
试验方式:
Test methods:
1、绝缘试样空气中击穿或耐压试验
1, insulation test specimens in the air breakdown or pressure test
2、绝缘试样浸油中击穿或耐压试验
2, insulation breakdown or compressive specimen immersed in test
3、绝缘试样空气中阶梯击穿或耐压试验
3, insulation test specimens in the air breakdown or pressure test
4、绝缘试样浸油中阶梯击穿或耐压试验
The 4 step, the insulation breakdown or compressive specimen immersed in test
注:根据用户要求,可定制其他试验方式
Note: according to user requirements, other test methods can be customized
技术要求:
Technical requirements:
1、设备输入电压: 交流 50KV (普通试验室电源均可兼容)
1, equipment input voltage: AC 50KV (common test room power supply can be compatible)
2、试验电压方式: 交流 0--50 KV ;
2, test voltage mode: AC KV 0--50;
直流 0--50 KV
DC KV 0--50
3、电器容量:10KVA
3, electrical capacity: 10KVA
4、试验方法:0-50KV全量程可调(采用高精度电压采样器件,取消了同类厂家由于电压采样精度不够必须采用高压分级的方式)
4, test method: 0-50KV full range adjustable (using high precision voltage sampling device, cancel the same manufacturers due to the voltage sampling accuracy is not enough high voltage classification method)
5、击穿及耐压试验升压速率:
5, breakdown and pressure test boost rate:
0.1 KV/S
0.1 KV/S
0.2 KV/S
0.2 KV/S
0.5 KV/S
0.5 KV/S
1.5 KV/S
1.5 KV/S
2 KV/S
2 KV/S
2.5 KV/S
2.5 KV/S
3.0 KV/S
3 KV/S
安全保护功能:
Safety protection function:
1、试验在试验箱中进行,试验箱门打开时电源加不到高压变压器输入端,即高压侧无电压。100KV测试设备高压电极距离试验箱壁的zui近距离大于270mm,50KV测试设备高压电极距离试验箱壁的zui近距离大于250mm,试验时即使人接触箱壁也不会有危险。
1, the test in the test chamber, the test box door open when the power supply is not added to the high voltage transformer input side, that is, the high voltage side no voltage. 100kV test equipment for high voltage electrode distance test chamber wall of the recent distance is more than 270, high-voltage test equipment of high voltage electrode distance test chamber wall of the recent distance greater than 250mm, test even people who come in contact with the wall of the box will not be in danger.
2、设备要安装单独的保护地线。接保护地线,主要是减少试样击穿时对周围产生的较强的电磁干扰。也可避免控制计算机失控。
2, equipment to install a separate protective ground. The protective earth wire is mainly to reduce the strong electromagnetic interference generated by the breakdown of the sample. Can also avoid the control of computer control.
3该试验设备的电路设有多项保护措施,主要有:过流保护、过压保护、漏电保护、短路保护、直流试验放电报警,电磁放电等。
3 the circuit of the test equipment is equipped with a number of protective measures, including: over current protection, over voltage protection, leakage protection, short-circuit protection, DC test discharge alarm, electromagnetic discharge, etc..
4、直流试验放电报警功能:在设备做完直流试验时,当开启试验门时设备会自动报警,直至使用设备上的放电装置放电后报警会自动取消.(注:因为直流试验后不放电会危险到人身安全,不能直接拿取电极,起到提醒使用人员放电以免造成人身伤害)。
4, DC discharge test alarm function: when we finish DC test equipment. When opening the door test equipment will automatically alarm until after using the device discharge discharge device alarm will automatically be cancelled. (Note: because the DC test on it would be dangerous to personal safety, can not be directly fetching electrode to caution the use of personnel discharge so as not to cause physical damage).
5、试验放电装置,电磁铁自动放电放置。
5, test discharge device, automatic discharge of the electromagnet.
 

关键字:

电压击穿试验仪,

介电击穿强度试验仪,

耐电压击穿测试仪,

工频电压击穿测试仪,

工频介电击穿强度测定仪,

工频耐电压击穿试验机,

电压击穿试验机,

绝缘材料电气强度测试仪,

击穿强度试验仪,

电气强度测试仪,

介电强度试验机,

击穿电压试验机,

电气介电强度试验仪,

固体绝缘材料电气强度试验仪,

硫化橡胶工频击穿电压强度耐电压击穿测定仪,

工频耐击穿电压试验仪,

固体电绝缘材料工业电源频率下的介电击穿电压和介电强度的试验仪,

橡胶塑料薄膜工频电压或直流电压下击穿强度和耐电压的测试仪器。

 


留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
主营产品:电压击穿试验仪,介电常数介质损耗测试仪,体积表面电阻率测试仪,海绵泡沫落球回弹试验仪,介电常数测试仪,体积电阻率测试仪,海绵泡沫压陷硬度试验仪,介电击穿强度试验仪,橡胶塑料滑动摩擦磨损试验机,耐电弧试验仪,毛细管流变仪,自动进样器,电气强度试验机,欢迎来电咨询。
版权所有©2024 北京北广精仪仪器设备有限公司

化工仪器网

推荐收藏该企业网站