北京北广精仪仪器设备有限公司
品质是生命,服务是宗旨

Quality is life, service is the tenet

网站首页  ◇  产品展示    ◇  电子万能拉力试验机 ◇   门式结构电子万能试验机 > BWN-50KN三点弯曲万能试验机

三点弯曲万能试验机

发布时间:  2023-10-28

产品型号:  BWN-50KN

产品报价:  

厂商性质:  生产厂家

所  在  地:  北京市海淀区上地科技园上地十街1号

产品特点:  三点弯曲万能试验机

同类产品
更多产品
产品概述

三点弯曲万能试验机概述 

本机可对橡胶、塑料、发泡材料、塑胶、薄膜、软包装、管材、纺织物、纤维、纳米材料、高分子材料、复合材料、合成材料、包装带、纸张、电线电缆、光纤光缆、安全带、保险带、皮革皮带、鞋类、胶带、聚合物、弹簧钢、不锈钢、铸件、铜管、有色金属、汽车零部件、合金材料及其它非金属材料和金属材料进行拉伸、压缩、弯曲、撕裂、90°剥离、180°剥离、剪切、粘合力、拔出力、延伸伸长率等试验。
 

 

三点弯曲万能试验机主机规格 
A.高精度美国传力力量传感器: 0-3T

 

 

力量精度在±0.5 %以内。 
B.容量分段:全程七档:× 1× 2× 5× 10× 20× 50× 100
采用高精度24 bits A/D,取样频率200Hz
全程力量zui大解析度 1/3000,000
C.动力系统:见配置清单

D.控制系统: 采用Pulse Command控制方式使控制更精准 
速度控制范围0.001~500 mm/min 
中联板调整具有快速粗调与慢速微调功能。 
测试后自动回归原点、自动储存。 
E.数据传输方式:RS232传输 
F.显示方式:UTM107+WIN-XP测试软件计算机屏幕显示。 
G.简洁的全程一档与精密全程七档力量线性双校正系统。 
H.豪华测试界面软件可实现定速度、定位移、定荷重(可设定保持时间)、定荷重增率、定应力增率、定应变增率等控制模式加上多阶控制模式可满足不同的测试要求。 
I.测试空间:测试宽度约350 mm(标准规格) 
 联板行走空间950 mm(不含夹具)(标准规格) 
J.全程位移: 编码器2500 P/R,提升4倍精度 
采用LINE DRIVE编码器抗干扰能力* 
位移解析0.001mm 
小变形:金属引伸计,解析 0.001mm(选购) 
K.安全装置:过载紧急停机装置、上下行程限定装置、漏电自动断电系统、自动断点停机功能。 
M.手控方式:可增添无线遥控装置或手动操作盒。(选购) 


软件功能介绍:
A. 测试标准模块化功能:提供使用者设定所需应用的测试标准设定,范围涵盖GBASTMDINJISBS…等。测试标准规范。 
B. 试品资料:提供使用者设定所有试品数据,一次输入数据*重复使用。并可自行增修公式以提高测试数据契合性。 
C. 双报表编辑:*开放式使用者编辑报表,供测试者选择自己喜好的报表格式(测试程序新增内建EXCEL报表编辑功能扩展了以往单一专业报表的格局) 
D. 各长度、力量单位、显示位数采用动态互换方式,力量单位TKgNKNglb,变形单位mmcminch 
E. 图形曲线尺度自动*化(Auto Scale),可使图形以*尺度显示。并可于测试中实时图形动态切换。具有荷重-位移、荷重-时间、位移-时间、应力-应变荷重-2点延伸图,以及多曲线对比。 
F.测试结果可以EXCEL格式的数据形式输出。 
G.测试结束可自动存档、手动存档,测试完毕自动求算zui大力量、上、下屈服强度、滞后环法、逐步逼近法、非比例延伸强度、抗拉强度、抗压强度、任意点定伸长强度、任意点定负荷延伸、弹性模量、延伸率、剥离区间zui大值、zui小值、平均值、净能量、折返能量、总能量、弯曲模量、断点位移x%荷重、断点荷重X%位移、等等。 
数据备份:测试数据可保存在任意硬盘分区。 
H.多种语言随机切换:简体中文、繁体中文、英文。 
I.软件具有历史测试数据演示功能。 


附件 
A.一年保固书及中文操作说明书各一份。 
B. 随机赠送标准拉力夹具一组(其他夹具选购)。 
C.拉力机测试软件一份。 

可测试项目 
(一)普通测试项目:(普通显示值及计算值) 
拉伸应力      ●拉伸强度 
扯断强度      扯断伸长率 
定伸应力      ●定应力伸长率 
定应力力值    撕裂强度 
任意点力值    ●任意点伸长率 
抽出力         ●粘合力及取峰值计算值 
压力试验       ●粘合力剥离力试验 
弯曲试验       ●拔出力穿刺力试验 


特殊测试项目: 
1.弹性系数即弹性杨氏模量 
定义:同相位的法向应力分量与法向应变之比。为测定材料刚性之系数,其值越高,材料越强韧。 
2.比例限:荷重在一定范围内与伸长可以维持成正比之关系,其zui大应力即为比极限。 
3.弹性限:为材料所能承受而不呈*变形之zui大应力。 
4.弹性变形:除去荷重后,材料的变形*消失。 
5.*变形:除去荷重后,材料仍残留变形。 
6.屈服点:材料拉伸时,变形增快而应力不变,此点即为屈服点。屈服点分为上下屈服点,一般以上屈服点作为屈服点。 
屈服(yield):荷重超过比例限与伸长不再成正比,荷重会突降,然后在一段时间内,上下起伏,伸长发生较大变化,这种现象叫作屈服。
7.屈服强度:拉伸时,*伸长率达到某一规定值之荷重,除以平行部原断面积,所得之商。 
8.弹簧K值:与变形同相位的作用力分量与形变之比。 
9.有效弹性和滞后损失: 
在拉力机上,以一定的速度将试样拉伸到一定的伸长率或拉伸到规定的负荷时,测定试样收缩时恢复的功和伸张时消耗的功之比的百分数,即为有效弹性;测定试样伸长、收缩时所损失的能与伸长时所消耗的功之比的百分数,即为滞后损失。 


主要计数指标 
A.荷重元:0-3T
B.力量解析度:1/300000
C.力量准确度:≤0.5 
D.力量放大倍数:7段自动切换 
E.位移解析度:1/1000
F.位移准确度:≤0.5 
G.金属引伸计解析度:1/1000
H.金属引伸计准确度:≤0.5 
I.大变形引伸计准确度:±1mm
J.速度范围:0.001-500mm/min(特殊测试速度亦可依客户需求定制) 
K.行走空间:950mm(不含夹持器、特殊测试空间亦可依客户需求定制) 
L.测试宽度:350mm(特殊测试宽度亦可依客户需求定制) 
M.使用电源:220V 50HZ 
N.功率:约600W
O. 机台尺寸:约660×560×1600 mm(××)  

 

 

 

 

   电 脑 拉 力 机 配 置 清 单

 

编号

名称

国家

地区

1

传感器

美国

传力(美国)

2

滚珠丝杆

中国

精骏(深圳)

3

伺服电机

日本

松下(日本)

4

伺服驱动器

日本

松下(日本)

5

主 板

中国

本厂

6

软 件

中国

本厂

7

夹 具一付

中国

本厂

 

 

 

 

 

 

 

售后服务承诺

1.我公司产品实行“质量三包”质量保证期一年,终身服务(裁刀为消耗品,不在保修范围之内)。在质量保证期内,对由于设计、制造、工艺或材料的缺陷所发生的故障负责,并免费维修和更换缺陷的零件或整机。质量保证期过后硬件更换接受成本费用,软件免费升级。

2.对于我公司随机配置的易损件不在“质量三包”期内不做免费处理,但保证及时有偿长期优惠供应。

3.我公司在全国设有分公司或办事处,在接到用户鼓掌信息后1小时内响应,2小时内提供解决方案,若需派专业的维修工程师到现场服务,可在48小时内到达现场维修,4小时内排除故障。

4.在质保期满以后,我方将以优惠的价格提供保修服务,当发生故障时,我方仍将按第3项处理。

 

 Summary of three point bending universal testing machine 
 
The machine for rubber, plastic, foam materials, plastics, films, flexible packaging, tubing, fabric, fiber, nano materials, polymer materials, composite materials, synthetic materials, packaging, paper, wire and cable, fiber optic cable, seat belts, belts, leather belt, shoes, belt, polymer, spring steel, stainless steel, casting, copper pipe, non-ferrous metal, auto parts, alloy materials and other non-metallic materials and metal materials for tensile, compression, bending, tearing, 90 °, 90 ° peel, peel, shearing, binding and drawing output, such as stretching elongation test. 
 
 
 
 
The three point bending host universal testing machine specifications 
A. high precision America force power sensor: 0 to 3 t 
 
 
 
 
 
Three point bending universal testing machine power accuracy within + / - 0.5%. 
B. capacity section: the whole seven gears: x 1, x 2, x 5, 10, 20 x, x 50, 100 
24 bits A/D with high precision, sampling frequency 200 hz 
The whole strength maximum resolution 1/3000000 
C. power system: see the configuration list 
 
D. control system: adopting Pulse Command control method makes the control more accurate 
The speed control range of 0.001 ~ 500 mm/min. 
Intermediate plate adjustment is fast coarse adjustment and the slow tuning function. 
Automatic return to the origin, automatic storage after test. 
E. data transmission mode, RS232 transmission 
F. display mode: UTM107 + Windows XP computer screen test software. 
G. concise programme and precision in the whole process of the whole linear double seven power calibration system. 
H. luxury test interface software which can realize constant speed, constant displacement, load, can be set to keep time, load rate, and the stress rate, strain rate and control mode combined with multistage control mode can meet the test requirements of different. 
I. test space: width 350 mm (standard) 
Al plate walking space 950 mm (excluding jig) (standard) 
J. displacement: all the encoder 2500 P/R, 4 times improve accuracy 
Using the LINE DRIVE encoder strong anti-jamming ability 
Displacement resolution of 0.001 mm. 
Small deformation: metal, extensometer resolution of 0.001 mm (to buy) 
K. safety device: overload emergency stop device, up and down stroke limit device, automatic leakage power system, automatic breakpoint stop function. 
M. manual mode: can add wireless remote control or manual operation box. (to buy) 
 
 
Three point bending universal testing machine software function is introduced: 
A. test standard modular function: offer the user set the setting of the test standard of application range of GB, ASTM, DIN, JIS, BS... And so on. Test standards. 
B. try product information: provide the user to set all the test data, a permanent input data reuse. And can be amended formula in order to improve the test data, in particular on its own. 
C. double report editor: compley open users edit report, for the tester to choose their preferences of report format (test program new built-in editor by EXCEL function extends past the pattern of single professional report) 
D. the length, power unit, according to figures by using dynamic exchange way, power unit T, Kg, N, KN, g, lb, mm, cm, inch, deformation units. 
E. graph Scale automatic optimization (Auto Scale), can make the graphics displayed in optimal Scale. And to test the real-time dynamic graphic to switch. With load - displacement and load - time, displacement, load, stress and strain - 2 extension points, and curve comparison. 
F. the test result can EXCEL format of the data form output. 
G. the end of the test can be automatically archived, manual archive, testing is completed automatically calculate maximum strength, upper and lower yield strength, hysteresis loop method, successive approximation method, extension strength, tensile strength, compressive strength, the strength of any focal point elongation, any focal point load extension, elastic modulus, elongation, stripping interval maximum, minimum, average, net energy, turn-back energy, total energy, bending modulus, breakpoint displacement x x % % load, breakpoint load on the displacement, and so on. 
Data backup: test data can be stored in any hard disk partition. 
H. random switching multiple languages: simplified Chinese, traditional Chinese, English. 
I. the software test data with a history of demonstration function. 
 
 
Three point bending universal testing machine accessories 
A. one year warranty and A Chinese operating instructions. 
B. give standard random tension clamp (fixture) of choose and buy other groups. 
C. traction machine is a special test software. 
 
Three point bending universal testing machine to test project 
(a) general test project: general display value and calculated value) 
Low tensile stress low tensile strength 
Low break strength, low elongation at failure 
Low stretch stress set low stress and elongation 
Low stress strength low tearing strength 
Low strength low arbitrary point arbitrary point elongation 
Low withdrawal force low bonding strength and the peak value 
Low pressure test low bonding strength stripping force test 
Low bending test low output puncture pull force test 
 
 
Three point bending test project of the universal testing machine: 
1. The elastic coefficient of the elastic young's modulus 
Definition: and with the method of phase to the ratio of strain to stress components and the method. For the determination of rigid coefficient of the material, the higher its value, the material, the more strong. 
2. The ratio limit: load within a certain range is proportional to the elongation can maintain the relationship, the maximum stress is than the limit. 
3. The elastic limit: for materials are not showed the maximum stress of permanent deformation. 
4. Elastic deformation: after removing the load, material deformation disappear entirely. 
5. Permanent deformation: after removing the load, the material is still residual deformation. 
6. The yield point, tensile, deformation increase fast and stress constant, this point is the yield point. The yield point is divided into upper and lower yield point, yield point above as a general yield point. 
The yield (yield) : load exceed ratio is proportional to the elongation is no longer, dangerously load, and then for a period of time, ups and downs, elongation, great changes have taken place this kind of phenomenon is called the yield. 
7. The yield strength, tensile, permanent elongation reaches a certain specified value of the load, divided by the parallel of the original sectional area, the income of the business. 
8. Spring K value: with deformation phase reaction component and the ratio of the deformation. 
9. The effective elastic and hysteresis loss: 
In tensile machine, the sample at a certain speed stretch to a certain elongation or stretching to the regulation of load, contraction measured sample recovery work and for the consumption of the percentage of the ratio of the work, is the effective elastic; Lost when the specimen elongation, shrinkage is measured with the percentage of elongation is consumed when the ratio of the work, is the hysteresis loss. 
 
 
Three point bending universal testing machine main count index 
A. load yuan: 0 to 3 t 
B. power resolution: 1/300000 
C. power accuracy: 0.5% or less 
D. power magnification: 7 period of automatic switching 
E. displacement resolution: 1/1000 
F. displacement accuracy: 0.5% or less 
G. metal stretch meter resolution: 1/1000 
H. metal stretch meter accuracy: 0.5% or less 
I. large deformation stretch accuracy: + / - 1 mm 
J. speed range: 0.001-500 - mm/min (special test speed can also be in accordance with customer demand customization) 
K. walking space: 950 mm (excluding holder, special test space can also be in accordance with customer demand customization) 
L. test width: 350 mm (special test width can be according to the customer demand customization) 
M. use power: 30 220 v, 50 hz. 
N. power: 600 w 
O. the machine size: 660 * 560 * 560 mm (length x width x height) 
 
 
 
 
 
 
 
 
 
Computer tensile machine configuration list 
 
 
 
Serial number 
 
The name of the 
 
countries 
 
region 
 

 
The sensor 
 
The United States 
 
Force (USA) 
 

 
Ball screw 
 
China 
 
Jing jun (shenzhen) 
 

 
Servo motor 
 
Japan 
 
Panasonic (Japan) 
 

 
Servo drive 
 
Japan 
 
Panasonic (Japan) 
 

 
The main board 
 
China 
 
Our factory 
 

 
software 
 
China 
 
Our factory 
 

 
Clip with a pair of 
 
China 
 
Our factory 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
After-sales service commitment 
 
1. The products of our company practice \"three guarantees\" quality guarantee period for one year, life-long service (for consumables, cutting knife is not in the scope of the warranty). During the quality guarantee period, due to the design, manufacture, process or material defects are responsible for the failure, and free of maintenance and replacement of defective parts or the whole machine. After the quality guarantee period hardware change to accept the cost, free software upgrades. 
 
2. Random configuration for my company of wearing parts is not in the period of \"the quality 3 packets\" don't do free treatment, ensure timely paid long-term preferential supply. 
 
3. Our company has branches or offices across the country, within 1 hour after receiving user clapping information response, provide solution for 2 hours, if need to send professional maintenance engineer to on-site service, maintenance can be arrived at the scene within 48 hours, 4 hours of troubleshooting. 
 
4. After the expiration of the warranty, we will with preferential price to provide warranty service, when a failure occurs, we will still according to item 3 processing. 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

 

 

 


留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
主营产品:电压击穿试验仪,介电常数介质损耗测试仪,体积表面电阻率测试仪,海绵泡沫落球回弹试验仪,介电常数测试仪,体积电阻率测试仪,海绵泡沫压陷硬度试验仪,介电击穿强度试验仪,橡胶塑料滑动摩擦磨损试验机,耐电弧试验仪,毛细管流变仪,自动进样器,电气强度试验机,欢迎来电咨询。
版权所有©2024 北京北广精仪仪器设备有限公司

化工仪器网

推荐收藏该企业网站