北京北广精仪仪器设备有限公司
品质是生命,服务是宗旨

Quality is life, service is the tenet

网站首页  ◇  产品展示    ◇  电压击穿试验仪 ◇   电气强度试验仪 > BDJC-50KV电压强度试验机

电压强度试验机

发布时间:  2023-10-27

产品型号:  BDJC-50KV

产品报价:  

厂商性质:  生产厂家

所  在  地:  北京市海淀区上地科技园上地十街1号

产品特点:  电压强度试验机

同类产品
更多产品
产品概述

电压强度试验机概述


电压强度试验机采用计算机控制,通过人机对话方式,完成对绝缘介质材料的工频电压击穿,工频耐压试验。


适用于对固体绝缘材料(如:绝缘漆、树脂和胶、浸渍纤维制品、层压制品、云母及其制品、塑料、薄膜复合制品、陶瓷和玻璃等)在工频电压下击穿电压,击穿强度和耐电压的测试。


仪器对实验过程中的各种数据快速、准确地进行采集、处理、存取、显示、打印。


满足标准:
GB1408-2006 GB/T1695-2005 GB/T3333  HG/T3330 /GB12656 /ASTM D149 .
      GB1408-2006 绝缘材料电气强度试验
      GB/T1695-2005 硫化橡胶工频电压击穿强度和耐电压强度试验
      GB/T3333 电缆纸工频电压击穿试验
      HG/T 3330绝缘漆漆膜击穿强度测定
      GB12656 电容器纸工频电压击穿试验
       ASTM D149 固体电绝缘材料在工业电源频率下的介电击穿电压和介电强度试验

安全保护功能:
◆ 试验在试验箱中进行,试验箱门打开时电源加不到高压变压器输入端,即高压侧无电压。100KV测试设备高压电极距离试验箱壁的zui近距离大于370mm,50KV测试设备高压电极距离试验箱壁的zui近距离大于250mm,试验时即使人接触箱壁也不会有危险。
◆ 设备要安装单独的保护地线。接保护地线,主要是减少试样击穿时对周围产生的较强的电磁干扰。也可避免控制计算机失控。
◆ 该试验设备的电路设有多项保护措施,主要有:过流保护、失压保护、漏电保护、短路保护、直流试验放电报警等。
◆直流试验放电报警功能:在设备做完直流试验时,当开启试验门时设备会自动报警,直至使用设备上的放电装置放电后报警会自动取消.(注:因为直流试验后不放电会危险到人身安全,不能直接拿取电极,起到提醒使用人员放电以免造成人身伤害)。
◆ 试验放电装置,随主机为一体化,改进了以往单独配备一根放电杆的功能。


软件功能:
    01、软件平台:WINDOWS窗口操作平台,界面直观,便于操作
02、曲线显示:在实验过程中可以动态显示试验曲线
03、数据导出:可以对试验结果导入EXCEL表格
04、实验报告:可以人为设置报告名称,并对实验报告进行打印
05、试验方式:可以根据需求对直流试验和交流试验进行灵活选择
06、试验方法:可以根据需求自行选择击穿电压、耐压试验、梯度试验
07、参数设置:可以根据不同的试验方式及试验方法灵活设置所需的不同参数值
08、试样设置:可对不同标准的试样参数灵活设置
09、人员管理:设置用户名及密码,不同的操作员登入进行不同的试验,互不影响
10、标准选择:含有不同标准,可根据需求自行选择
11、连续操作:连续操作试验时,可直接在软件里选择电机复位,进行二次试验



技术指标:
01、输入电压: 交流 220 V
02、输出电压: 交流 0--100 KV ;
               直流 0—100 KV
03、电器容量: 10KVA
04、高压分级: 0-100KV
05、升压速率:0.01-5.0kv
              (备注:满足标准要求并可以根据用户需求设定不同的升压速率)
06、试验方式:
           直流试验:1、匀速升压  2、梯度升压 3、耐压试验
           交流试验:1、匀速升压 2、梯度升压 3、耐压试验
07、试验介质:空气,试验油
08、安装灵敏度较高的过电流保护装置保证试样击穿时在0.05S内切断电源。
09、仪器配备*故障报警系统 避免用户操作故障仪器发生危险。(上位机报警和下位机报警)



整机组成:
1、升压部件:由调压器和高压变压器组成0~50KV的升压部分。
2、动部件:由步进电机均匀调节调压器使加给高压变压器的电压变化。
3、检测部件:由集成电路组成的测量电路。通过信号线把检测的模拟信号和开关信号传给计算机。
4、计算机软件:通过智能电路把由检测设备采集的测控信号传给计算机。计算机根据采集的信息控制设备运行并处理试验结果。
5、试验电极:根据国家标准(1408.1-2006)随设备提供三个电极,具体规格为:Ф25mm×25mm两个;Ф75mm×25mm一个。



标签:

电压击穿试验仪,

介电击穿强度试验仪,

耐电压击穿测试仪,

工频电压击穿测试仪,

电压击穿仪,

工频介电击穿强度测定仪,

工频耐电压击穿试验机,

电压击穿试验机,

绝缘材料电气强度测试仪,

击穿强度试验仪,

电气强度测试仪,

介电强度试验机,

击穿电压试验机,

电气介电强度试验仪,

固体绝缘材料电气强度试验仪,

硫化橡胶工频击穿电压强度耐电压击穿测定仪,

耐电压击穿强度试验仪,

工频耐击穿电压试验仪,

固体电绝缘材料工业电源频率下的介电击穿电压和介电强度的试验仪,

橡胶塑料薄膜工频电压或直流电压下击穿强度和耐电压的测试仪器。



注意事项:
●本仪器试验过程中如空气相对湿度大于70%,两电极间空气放电的距离会增加很多,所以试验中请与仪器保持1.2米的距离。
●本仪器之控制计算机专为电压击穿试验机设计,请勿随意添加和删除程序或移作它用。
●本公司保留对设备改进的权利,并不另行通知用户。

注:   其它未尽事宜请,我们将竭诚为您服务。



配置
01                   试验主机               一台
02                   高压发生器             一套
 03                   试验电极               二套 (国标1408.1)
 04                   试验油箱               一只
05                   放电系统               一套
06                   控制系统               一套
07                   数据采集系统            一套
08                   试验软件                一套 光盘
09                   计算机                  一套 品牌 可选 PC/EPC
10                   喷墨打印机              一台 品牌
11                   产品使用说明书           一份
12                   计量证书                 一份
13                   产品合格证               一份
14                   电子稳压器               一台
15                   蓝牙发射器               一支
16                   蓝牙接收器               一支



电压击穿试验仪概述

Voltage breakdown tester overview

电压击穿试验仪采用计算机控制,通过人机对话方式,完成对绝缘介质材料的工频电压击穿,工频耐压试验。

Computer controlled by voltage breakdown testing instrument, through the man-machine dialogue mode, the completion of the power frequency voltage breakdownof dielectric material, power frequency withstand voltage test.

适用于对固体绝缘材料(如:绝缘漆、树脂和胶、浸渍纤维制品、层压制品、云母及其制品、塑料、薄膜复合制品、陶瓷和玻璃等)在工频电压下击穿电压,击穿强度和耐电压的测试。

Suitable for solid insulation materials (such as: insulating paint, resin and rubber,impregnated fiber products, laminated products, mica and its products, plastic, thin film composite products, such as ceramic and glass) in the breakdown voltage ofpower frequency voltage, breakdown strength and voltage withstand test.

仪器对实验过程中的各种数据快速、准确地进行采集、处理、存取、显示、打印。

Instruments of various kinds of data in experiment process fast, accurayacquisition, processing, display, printing, access.

电压击穿试验仪满足标准:

Voltage breakdown tester to meet the standard:

GB1408-2006 GB/T1695-2005 GB/T3333 HG/T3330 /GB12656 /ASTM D149 .

GB1408-2006 GB/T1695-2005 GB/T3333 HG/T3330 /GB12656 /ASTM D149.

GB1408-2006 绝缘材料电气强度试验

GB1408-2006 insulation electrical strength test of material

GB/T1695-2005 硫化橡胶工频电压击穿强度和耐电压强度试验

GB/T1695-2005 vulcanized rubber power frequency voltage breakdown strengthand voltage resistance strength test

GB/T3333 电缆纸工频电压击穿试验

GB/T3333 cable paper power frequency voltage breakdown test

HG/T 3330绝缘漆漆膜击穿强度测定

HG/T 3330 insulation paint film breakdown strength determination

GB12656 电容器纸工频电压击穿试验

GB12656 capacitor paper power frequency voltage breakdown test

ASTM D149 固体电绝缘材料在工业电源频率下的介电击穿电压和介电强度试验

ASTM D149 of solid electrical insulating materials at commercial power frequenciesthe dielectric breakdown voltage and dielectric strength test

电压击穿试验仪设备安全保护功能:

Voltage breakdown testing instrument equipment safety protection function:

◆ 试验在试验箱中进行,试验箱门打开时电源加不到高压变压器输入端,即高压侧无电压。100KV测试设备高压电极距离试验箱壁的zui近距离大于370mm,50KV测试设备高压电极距离试验箱壁的zui近距离大于250mm,试验时即使人接触箱壁也不会有危险。

The experiment was conducted in the experimental box, test box door is opensource applied to high voltage transformer input end, no voltage is high pressureside. 100KV test equipment of high voltage electrode distance test box wall nearestdistance is greater than 370mm, 50KV test equipment of high voltage electrodedistance test box wall nearest distance is greater than 250mm, the test even whenpeople contact the wall of the box will not be in danger.

◆ 设备要安装单独的保护地线。接保护地线,主要是减少试样击穿时对周围产生的较强的电磁干扰。也可避免控制计算机失控。

The equipment to install a separate protective ground. Grounding protection ground, mainly is the strong electromagnetic interference to reduce the sample breakdown when the surrounding the. Also avoid control computer control.

◆ 该试验设备的电路设有多项保护措施,主要有:过流保护、失压保护、漏电保护、短路保护、直流试验放电报警等。

The test circuit of the device is provided with a number of protective measures,mainly include: over current protection, voltage loss protection, leakage protection,short-circuit protection, DC test discharge alarm.

◆直流试验放电报警功能:在设备做完直流试验时,当开启试验门时设备会自动报警,直至使用设备上的放电装置放电后报警会自动取消.(注:因为直流试验后不放电会危险到人身安全,不能直接拿取电极,起到提醒使用人员放电以免造成人身伤害)。

The DC discharge alarm function: in the equipment finished the DC test, when opening the door when the test equipment will automatically alarm, discharge device discharge until use equipment after the alarm will be cancelled automatically. (Note: because the DC test and not put electricity danger to personal safety, can not directly get electrode, to remind the use of personnel in order to avoid personal injury) Adult discharge.

◆ 试验放电装置,随主机为一体化,改进了以往单独配备一根放电杆的功能。

The experimental discharge device, with the host for the integration, improves the past with separate one puts pole function.

软件功能:

The software function:

01、软件平台:WINDOWS窗口操作平台,界面直观,便于操作

01, the software platform: WINDOWS windows operating platform, intuitive interface, easy operation

02、曲线显示:在实验过程中可以动态显示试验曲线

02, curve display: during the experiment can dynamically display the test curve

03、数据导出:可以对试验结果导入EXCEL表格

03, data export: can the test results into EXCEL table

04、实验报告:可以人为设置报告名称,并对实验报告进行打印

04, experimental report: can be artificially set the report name, and print the test report

05、试验方式:可以根据需求对直流试验和交流试验进行灵活选择

05, test mode: can flexibly select for DC test and AC test according to the requirements of

06、试验方法:可以根据需求自行选择击穿电压、耐压试验、梯度试验

06, test methods: you can choose the breakdown voltage, voltage withstand test,gradient test according to the requirements of

07、参数设置:可以根据不同的试验方式及试验方法灵活设置所需的不同参数值

07, the parameter settings: you can test different ways according to different parameters and test methods flexibly set the required value

08、试样设置:可对不同标准的试样参数灵活设置

08, sample set: on the specimen parameters of different standard flexible settings

09、人员管理:设置用户名及密码,不同的操作员登入进行不同的试验,互不影响

09, personnel management: set the username and password, different operators indifferent test, mutual influence

10、标准选择:含有不同标准,可根据需求自行选择

Selection criteria: 10, with different standards, can choose according to need

11、连续操作:连续操作试验时,可直接在软件里选择电机复位,进行二次试验

11, continuous operation: continuous operation test, can directly select the motorreset in software, carries on two times of test

电压击穿试验仪技术指标:

Voltage breakdown tester technical indicators:

01、输入电压: 交流 220 V

01, the input voltage: AC 220 V

02、输出电压: 交流 0--100 KV ;

02, the output voltage: AC 0--100 KV;

直流 0—100 KV

DC 0 - 100 KV

03、电器容量: 10KVA

03, electrical capacity: 10KVA

04、高压分级: 0-100KV

04, high grade: 0-100KV

05、升压速率:0.01-5.0kv

05, the rate of pressure rise: 0.01-5.0kv

(备注:满足标准要求并可以根据用户需求设定不同的升压速率)

(Note: to meet the standard requirement and can set different rates according to the user demand boost)

06、试验方式:

06, test methods:

直流试验:1、匀速升压 2、梯度升压 3、耐压试验

DC test: 1, 2, 3 speed boost pressure gradient, pressure test

交流试验:1、匀速升压 2、梯度升压 3、耐压试验

AC test: 1, 2, 3 speed boost pressure gradient, pressure test

07、试验介质:空气,试验油

07, the test medium: air, test oil

08、安装灵敏度较高的过电流保护装置保证试样击穿时在0.05S内切断电源。

Over current protection device 08, the installation of high sensitivity to ensure the power supply is cut off in the 0.05S sample breakdown.

09、仪器配备*故障报警系统 避免用户操作故障仪器发生危险。(上位机报警和下位机报警)

09, the instrument is equipped with advanced fault alarm system to avoid user faultinstrument of danger. (the host computer and slave computer alarm alarm)

电压击穿试验仪整机组成:

Voltage breakdown tester machine component:

1、升压部件:由调压器和高压变压器组成0~50KV的升压部分。

1, the step-up component: a pressure regulator and high voltage transformer iscomposed of 0 ~ 50KV pressor part.

2、动部件:由步进电机均匀调节调压器使加给高压变压器的电压变化。

2, dynamic components: by stepping motor even regulator is adjusted make added to the voltage change of the high voltage transformer.

3、检测部件:由集成电路组成的测量电路。通过信号线把检测的模拟信号和开关信号传给计算机。

The 3 part: measurement, detection circuit is composed of integrated circuit. The detection of the analog signal and switch signal to the computer through the signal line.

4、计算机软件:通过智能电路把由检测设备采集的测控信号传给计算机。计算机根据采集的信息控制设备运行并处理试验结果。

4, computer software: the control signal by the detection equipment acquisition to the computer through the inligent circuit. According to the information collected by computer control equipment operation and processing test results.

5、试验电极:根据国家标准(1408.1-2006)随设备提供三个电极,具体规格为:Ф25mm×25mm两个;Ф75mm×25mm一个。

5, the test electrode: according to the national standard (1408.1-2006) provided with the equipment of three electrodes, specifications: diameter of 25mm * 25MMtwo; with 75mm * 25MM a.

标签:电压击穿试验仪,介电击穿强度试验仪,耐电压击穿测试仪,工频电压击穿测试仪,电压击穿仪,工频介电击穿强度测定仪,工频耐电压击穿试验机,电压击穿试验机,绝缘材料电气强度测试仪,击穿强度试验仪,电气强度测试仪,介电强度试验机,击穿电压试验机,电气介电强度试验仪,固体绝缘材料电气强度试验仪,硫化橡胶工频击穿电压强度耐电压击穿测

Tags: voltage breakdown tester, tester dielectric breakdown strength, high voltagebreakdown tester, power frequency voltage breakdown tester, voltage breakdowntester, tester of electric power frequency dielectric breakdown strength, power frequency withstand voltage breakdown voltage breakdown testing machine,testing machine, electrical insulation material strength tester, breakdown strength tester, electric strength tester, dielectric strength testing machine, testing machine of electric breakdown voltage, dielectric strength tester, tester electrical strength of solid insulating materials, vulcanized rubber power frequency voltage breakdownstrength withstanding voltage breakdown test


留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
主营产品:电压击穿试验仪,介电常数介质损耗测试仪,体积表面电阻率测试仪,海绵泡沫落球回弹试验仪,介电常数测试仪,体积电阻率测试仪,海绵泡沫压陷硬度试验仪,介电击穿强度试验仪,橡胶塑料滑动摩擦磨损试验机,耐电弧试验仪,毛细管流变仪,自动进样器,电气强度试验机,欢迎来电咨询。
版权所有©2024 北京北广精仪仪器设备有限公司

化工仪器网

推荐收藏该企业网站